Hi, it is a well known and commented fact that in order to get the max performance from USB3 hdds connected to our routers, disabling the 'professional' tab setting 'reduce USB3.0 interference' is a must, since otherways the device is being handled at USB2 speeds.
BUT in order to do this you must make sure that you use a very high quality and properly shielded USB cable. I found out the hard way today that with a poorly shielded cable you can basically completely destroy your 2.4ghz...
USB3 Interference warning
BUT in order to do this you must make sure that you use a very high quality and properly shielded USB cable. I found out the hard way today that with a poorly shielded cable you can basically completely destroy your 2.4ghz...
USB3 Interference warning