I'm having trouble setting up static routes for an address range for an RT-AC68U, and wonder if this is a bug or not. This is with firmware 3.0.0.4.385_20633
My IP addresses below have been changed to protect my network, but this is the gist of it.
I have a double-NAT situation, so both LAN and WAN are on non-routable addresses.
WAN subnet is 10.10.10.x, 255.255.255.0
LAN subnet is 192.168.1.x, 255.255.255.0
If I set up a static route as follows, it works OK:
Host IP:10.10.10.50...
Possible bug with Static routing IP range - RT-AC68U
My IP addresses below have been changed to protect my network, but this is the gist of it.
I have a double-NAT situation, so both LAN and WAN are on non-routable addresses.
WAN subnet is 10.10.10.x, 255.255.255.0
LAN subnet is 192.168.1.x, 255.255.255.0
If I set up a static route as follows, it works OK:
Host IP:10.10.10.50...
Possible bug with Static routing IP range - RT-AC68U